5 Best Table Saw Miter Gauges (Tested & Reviewed in 2024)
If you’re going to be making miter cuts with a table saw often, there’s no doubt you’ll need an accurate, efficient, and easy-to-use miter gauge.
The truth is, there are tons of table saw miter gauges out there, so finding the best one for your needs isn’t always easy.
In this post, I’ll take a look at some of the best table saw miter gauges and explain what makes each one a worthwhile purchase. Let’s dig in!
In a hurry? The best table saw miter gauge is the Incra Miter 1000 because it’s exceptionally precise yet easy to use. It’s also durable, versatile, and affordable when compared to other table saw miter gauges of similar quality.
Quick Answer: Here are My Favorite Table Saw Miter Gauges! 👇
Best Table Saw Miter Gauge
- #1 Best Overall – Incra Miter 1000
- Best Quality – Kreg Adjustable Miter-Gauge
- Best Value – Precision Miter Gauge
- Best Locking System – INCRA MITERV27 Miter V27 Miter Gauge
- Best Compatibility – POWERTEC 71005 Deluxe Table Saw Miter Gauge
1. Incra Miter 1000 – #1 Best Overall
- Engraved stainless steel primary scale for precision accuracy
- 41 laser cut V-stops for extreme accuracy at all popular angles
- Patented GlideLOCK miter bar with 6 expansion points for quick repeats
The Incra Miter 1000 is a versatile, durable, and easy-to-use miter gauge that’s used to make extremely precise cuts on a table saw.
Made of stainless steel, this 41-tooth miter saw gauge is 18.25” x 18.25” x 4.5” (LxWxH), and it’s equipped with a patented GlideLOCK miter bar that has six expansion points to make repeat cutting faster and more convenient.
Its 18” telescoping incremental miter fence, which can extend to 31”, is capable of handling a variety of widths.
And its adjustable miter bar can fit square miter slots that are 3/4” wide and 3/8” deep, wether there’s a 15/16” T-slot at the bottom or not.
As far as slot widths go, the miter bar can accommodate 0.740”-0.765” slot widths.
It also has an Incra Flip Shop Stop-Fence Positioner, which helps you make more precise cuts.
Incra miter gauges also come with a 1-year warranty, which gives you a little peace of mind.
What I Liked:
- Can accommodate narrow and wide boards thanks to extendable fence
- Durability helps ensure stability when in use so you can get more accurate cuts
- Extremely accurate & incredibly versatile because of laser-cut primary scale
- Compact & relatively lightweight so easy to transport and store
- Locking miter bar allows for faster repeat cutting
What I Didn’t Like:
- Hex key used for tightening is hard to turn
- Binding of the runner’s nylon spaces could be better
My Thoughts
The Incra Miter 1000 is the best table saw miter gauge because it’s extremely accurate, well built and well designed, durable, easy to use, and competitively priced. Its versatility also makes it a must-have item for anyone who uses table saws to make miter cuts routinely. Sure, it has some minor flaws, but these are greatly outweighed by its sturdy telescoping fence, its laser-cut primary scale, and a handful of other first-rate components. And at this price, I challenge you to find a better table saw miter gauge. You won’t!
Other Stores
2. Kreg Adjustable Miter-Gauge – Best Quality
- Premium Home Improvement Tools: This miter saw table gauge helps you make accurate and repeatable angled cuts
- Versatile Woodworking Tool: Saw accessory has a brass pin that lets you make quick changes between stop angles
- Accurate Measuring Tool: Miter saw guide has 5 positive stops; vernier scale aids adjustments to 1/10 of a degree
When it comes to achieving microscopically precise cuts, no miter saw gauge on the market right now can outdo the Kreg Adjustable Miter-Gauge.
This “zero-calibration” miter gauge has stops at all the popular angles, i.e. 0°, 10°, 22½°, 30°, and 45°. Moreover, it has 1/10° markings on its Vernier scale so extremely precise angle cuts can be made.
And thanks to its long (24”), anodized-aluminum fence and stop combination, you can conveniently make the same cut again and again without adjusting anything.
The bar is 3/8” thick and 3/4” wide, and since there are five bar adjusters you can easily eliminate play in the miter slot; all you need is a screwdriver.
It also utilizes a precision lens cursor with a highly visible red line so setting the swing-stop is both easier and faster.
The swing-stop locks into place just by turning a nob, and its curved foot makes it possible to move the swing-stop without disengaging it.
Lastly, it weighs 6 lbs, is 25.25” x 2.63” x 6.25”, and comes with a decent limited warranty.
What I Liked:
- Extremely precise Vernier scale allows for a range of angled crosscuts & bevel cuts
- Heavier components give it decent stability and a quality feel
- Easy to adjust miter slot allows for more precise cuts
- Stops at common angles are firm to ensure smooth cuts
What I Didn’t Like:
- Doesn’t have a telescoping fence to accommodate wider materials
- Can be expensive than other miter gauges
My Thoughts
If it had more range, I wouldn’t hesitate to call the Kreg Adjustable Miter-Gauge the best miter gauge you can buy. Its precision is unmatched and a streamlined design makes it pretty easy to use. All the components utilized are quality and the workmanship is terrific. And whereas other miter gauges are difficult to adjust, this Kreg miter gauge takes no time to adjust, and it locks firmly in place once adjusted. So if you need to make expert miter cuts routinely, I would highly recommend this Kreg Miter Gauge.
Other Stores
3. Precision Miter Gauge – Best Value
- 【Table Saw Miter Gauge】This miter gauge is a a high performance woodworking angle tool, which mounts into…
- 【Precise Angle Cutting】Factory calibration, there are 13 stop grooves on the plus and minus(add an often…
- 【Simple & Secure Operation】The solid aluminum miter bar was 17.7” in length and is 0.35” thick by 7”…
If getting bang for your buck is your number-one priority, consider the Precision Miter Gauge – as it’s accurate, well-designed, easy to use, and unbelievably affordable when compared to miter gauges of similar quality.
Made of heavy-duty aluminum, this miter gauge has markings up to 60° on the left and right, and thanks to its special design you can’t see the handle when using this miter gauge.
Of course, it has common angle stops like other miter gauges, and it’s capable of achieving precise miter cuts thanks to its laser-cut Vernier scale, adjustable plungers, and firm locking system.
It has screw holes so it’s easy to attach to table saws large and small, and it’s amazingly lightweight at just 2.4 lbs.
Its dimensions are 19.1” x 7.3” x 2.75”, and it comes with a one-year limited warranty.
What I Liked:
- One of the most affordable miter gauges you can buy
- Usable in both bright and dimly lit spaces because of bold angle markings
- Secure table-gauge connection ensures stability during use
- Can be secured to most standard table saws thanks to universal design
- 45° solid aluminum fence makes cutting more convenient
What I Didn’t Like:
- The absence of a telescoping fence limits this gauge’s measuring capacity
- Takes longer to use since it’s a relatively bare-bones miter gauge
My Thoughts
The Precision Miter Gauge is a simple, high-quality miter gauge that’s sold for a can’t-beat price, and it doesn’t take long at all to get the hang of this tool. It’s a good miter gauge if you’re not too picky about precision, as it gets the job done but lacks some of the components other gauges employ to make precise measuring easier. That said, it still can be classified as a precision miter gauge, as its Vernier scale has all essential angle markings as well as popular fractional markings.
4. INCRA MITERV27 Miter V27 Miter Gauge – Most Angle Stops
- Miter Gauge featuring 27 angle stops for precise incremental control
- No-nonsense design and compact size
- Delivers extreme miter cutting accuracy
The INCRA MITERV27 Miter V27 Miter Gauge is another miter gauge that’s on the simpler side, but this one’s main feature is its 27-stop efficient locking system.
And in addition to being compatible with most standard table saws, this miter gauge works with band saws, routers, disk sanders, and belt sanders.
Like other Incra miter gauges, this one employs an AngleLock indexing system along with an adjustable GlideLOCK miter bar.
The bar has four expansion points that are adjustable on both sides, and when engaged they eliminate bar-channel play.
This miter gauge has markings up to 60° on the left and right, and there’s 5° between each miter stop.
There’s also a special stop at 22.5° – which can come in handy.
It also has dual-pivoting film arms for better accuracy, as well as a patented, top-mounted T-slot retainer flip, which is easy to engage and disengage.
Plus, it’s compatible with a range of popular saw brands, like Delta and Craftsman.
Lastly, it weighs 2.71 lbs and measures 17” x 6.88” x 3.5”.
What I Liked:
- Superior locking system with many more stops ensures precision measuring
- Pretty good value for the price
- Seamless design allows for faster, more convenient measuring
- Expansion points eliminate play to ensure smoother cuts
- It’s lightweight and compact and therefore easier to store and transport
- Compatibility makes it a very cost-effective measuring tool
What I Didn’t Like:
- Lacks the fence needed to handle wider workpieces
- White-on-orange markings are difficult to read in both bright and dim areas
My Thoughts
If an affordable miter gauge with a superior locking system is what you’re after, look no further than the INCRA MITERV27 Miter V27 Miter Gauge. Its simplicity makes it easy to use, and its durability ensures it’ll stay in place when engaged. Plus, the few additional components it employs come in handy when its time to make miter and bevel cuts. Of course, the absence of an expandable fence limits its capacity, but this isn’t a big deal if you’re not using this miter gauge for larger woodworking projects.
Other Stores
5. POWERTEC 71005 Deluxe Table Saw Miter Gauge – Most Compatible
- INCLUDES: (1) Table Saw Miter Gauge
- FUNCTION: Provides you with a premium table saw miter gauge replacement that allows you to make crosscuts at…
- FEATURES: Positive stops at all common angles for exceptional accuracy, a large ergonomical grip for control…
The POWERTEC 71005 Deluxe Table Saw Miter Gauge’s superior compatibility is the main quality that sets it apart from the other miter gauges on this list, but it’s also an accurate, simple, and built-to-last miter gauge.
It goes well with virtually all standard 3/4” x 3/8” miter slots, whether there’s a t-slotted miter slot or not, and it works with Bosch, Craftsman, DeWalt, Delta, and Jet saws, sanders, and routers.
Like the other miter gauges on this list, it has positive stops at common angles (30°, 45°, 60°, 75° & 90°), as well as fractional markings to allow precision measurements.
And to ensure comfort and control, it has a large grip. To ensure stability, there are play-eliminating screws, and there’s a tip-resistant washer.
The aluminum head and solid steel miter bar make this tool more stable as well, and they also ensure it won’t be inoperable if dropped or dinged.
Lastly, the markings are bold white against a black metallic surface, and this lightweight (3.3 lbs) miter gauge is 20” x 8” x 3”.
What I Liked:
- Its compatibility makes it more efficient and cost-effective
- Overall sturdiness allows for faster, more efficient measuring
- Markings are easy to read in both dark and bright areas
- Ergonomic grip makes operation easier on the hands
What I Didn’t Like:
- Limited capacity due to absence of telescopic fence
- Black metal can make following the cutting line more difficult
My Thoughts
If you use saws, sanders, and routers made by different brands, the POWERTEC 71005 Deluxe Table Saw Miter Gauge may be ideal for you, since it offers superior compatibility along with accuracy, durability, and convenience. It’s also relatively cheap when compared to similar miter gauges, yet it’s still capable of delivering stability and precision with each use. Plus, the locking system is reliable, and even after months of use it remains smooth. With more components, it’d give the first miter gauge on this list a run for its money.
What to Consider When Purchasing a Miter Gauge
Accuracy
When you’re in the market for a miter gauge, accuracy should be regarded as the most important facet.
After all, a miter gauge is a measuring tool, so above all else it has to be accurate.
And since this tool is often used in conjunction with cutting, accuracy is essential, as you may not have a chance to fix a mistake once you start cutting.
The best miter gauges employ a range of components to enable precision measuring.
For example, the Incra Miter 1000 (the best miter gauge on my list) has a telescoping fence, a miter bar with six expansion points, and a stop-fence positioner, all of which enable not only precise measuring but faster and more convenient repeat cutting as well.
Some miter gauges only go up to 45° on both sides, but the top-quality models designed for contractors extend 60° to the left and right.
Here’s an example of the miter gauge that came with my SKIL table saw. It’s not the best quality so I highly recommend picking up an aftermarket one.
And in between each degree, on a high-quality miter gauge, are fractional markings.
Lastly, miter gauge accuracy is in large part determined by its stability and the quality of its locking system, but more on these two points later.
Looking for more help using a miter gauge for your table saw? Check out the video below!
Durability
Durability is another important aspect to consider, since durability in part ensures accuracy.
Miter gauges that are made of heavy-duty materials, like stainless steel and solid aluminum, won’t wear down as easily, meaning they’ll provide precision for longer.
Miter gauges that are made of comparatively weaker materials wear down quicker and become less precise as they degrade.
Plus, if you drop or ding a low-quality gauge, there’s a chance you could cause damage which makes it inoperable.
Therefore, it’s best to stick with miter gauges made of heavier metals, as these hold up well over many years if properly maintained, and they can usually withstand even significant impacts.
Stability
Stability and accuracy go hand in hand. That is, if a table saw miter gauge isn’t stable, chances are it’ll have a hard time being accurate.
Once again, we see why miter gauges made of heavier materials are ideal.
More weight means less chance of the miter gauge shaking when engaged, which is good since even a slight bit of shaking can cause the measurement or cut to be off by as much as a whole degree.
The miter gauge should also be 100% on the table surface when in use, otherwise it won’t be able to deliver max precision.
Need more table saw accessories? Check out these best table saw fences or these top cross cut sleds for table saws!
Price
The best miter gauges are going to run you $150-$180, while the most affordable (yet still good models) are $50-$75.
The price of a miter gauge is largely determined by the materials it’s made of, the components it utilizes, its capabilities, and its brand.
If you’re not going to be making miter cuts in large materials often, you don’t need to spend top dollar on a stock miter gauge; these are mainly used by professional woodworkers.
Convenience
It’s not enough for a miter gauge to be accurate. It needs to be easy to use as well, otherwise you’ll struggle to achieve precise measurements, which most woodworking projects require.
The POWERTEC 71005 Deluxe Table Saw Miter Gauge, for example, has an ergonomic grip so the miter gauge is easy to adjust, while the Incra Miter 1000 and Kreg Adjustable Miter-Gauge have adjustable miter gauge fences to ensure stability.
How to Use a Miter Gauge
Square Crosscuts
Set the gauge to 90° (or 0° depending on how your table saw miter gauge is marked).
Make sure the table saw is unplugged before raising its blade as high as it will go.
Now slide the miter gauge forward until its front edge is in line with the saw blade.
Place one edge of a 6” combination square against the blade, and either perpendicular edge against the front edge of the miter gauge. Perfect alignment on both edges means you’re good to go.
Now pull the miter gauge back (towards you) and place the workpiece against the gauge’s front, flat edge.
Indicate where you want the cut.
When you’re ready, turn on the saw and slowly slide the miter gauge forward. As you approach the blade, make sure the board is firmly against the gauge’s edge.
Once the piece passes through the blade, you’ll have your crosscut.
Need some help? Check out the video below!
Angled Crosscuts (Miter Cuts)
Making angled cuts with a miter gauge is somewhat easier, since all you have to do is set the miter gauge to 45°; there’s no combination square required.
But when you’re making miter cuts, you should move the wood slower, since it’ll try to move more when being cut at an angle.
You can use a small woodworking clamp to secure it.
Moving slow is also important because you’ll be cutting against the grain, and moving the piece slowly reduces the chances of edge tearing.
Miter Saw Gauges: Table Saw vs Miter Saw
The key difference here is that table saws require a miter gauge attachment while miter saws include these.
You could argue that a fixed miter gauge is more stable than one that has to be attached, but the difference is truly negligible.
Check out this miter saw vs table saw comparison for more info!
Final Thoughts
To recap, the best miter gauge overall is the Incra Miter 1000 because it’s equipped with numerous components that ensure accuracy, durability, versatility, and easy operation, yet it’s priced much lower than other top-tier miter gauges.
In terms of best quality, the Kreg Adjustable Miter-Gauge owns that title because of superior workmanship and because it employs high-end components to deliver extremely precise measurements.
And last but not least, the Precision Miter Gauge owns the “best value” spot on my list because it costs of fraction of what other quality miter gauges do yet it’s accurate, well-designed, and built to last.